ISSMGE PAST PRESIDENT BIODATA RESEARCH TEACHING JTC3
LECTURES CONFERENCES COMMITTEES PUBLICATIONS SHORT COURSES

PUBLICATIONS

PUBLICATIONS

 

Book (authored)

 

Books (edited)

 

Technical Papers and Contributions to Books


  • BRIAUD, J.L., JEONG, S., BUSH, R.K., “Group Effect in the Case of Downdrag,”ASCE Geotechnical Engineering Congress, Denver, June 1991.

  • ENLEY, S.N., DUNLAP, W.A., SNOW, C., KNUCKEY, D., BRIAUD, J.L., LOWERY, L.L., “Performance of an Anchored Sheetpile Wall,” ASCE, Texas Section, San Antonio, Spring 1991.

  • LEPERT, Ph., BRIAUD, J.L., MAXWELL, J., “A Dynamic Method to Assess Actual Stiffness of Soil Underlying Spread Foundations, Transportation Research Record, Washington, 1991.

  • MAZOCH, M., BRIAUD, J.L., “Drilled and Grouted Piles:  Construction, Integrity, Capacity,” U.S. Dept. of Interior - MMS Biennial Report:  Technical Assessment and Research Program for Offshore Minerals Operations, Washington, 1991.

  • TZIRITA, A., JEANJEAN, Ph., DUNLAP, W.A., BRIAUD, J.L., “Detection of Hydrates by In Situ Testing,” Offshore Technology Conference, No. 6536, Houston, May 1991.

  • BRIAUD, J.L., LYTTON, R.L., “Pavement Design with the Pavement Pressuremeter,” International Conference on the Bearing Capacity of Roads and Airfields, Trondheim, Norway, July 1990.

  • BRIAUD, J.L., LIU, M.L., LEPERT, Ph., “The WAK Test to Check the Increase in Soil Stiffness Due to Dynamic Compaction,” Geotechnics of Waste Fills: Theory and Practice, ASTM, STP 1070, Philadelphia, June 1990.

  • LEPERT, P., BRIAUD, J.L., “Dynamic Nondestructive Testing of Footing Stiffness,” Eurodyn >90, Bochum, Germany, June 5-7, 1990.

  • BRIAUD, J.L., COSENTINO, P. J., “Pavement Design With the Pavement Pressuremeter,” 3rd International Conference on the Pressuremeter, Oxford, England, April 1990.

  • BRIAUD, J.L., LEPERT, Ph., “The WAK Test to Find Spread Footing Stiffness,” Journal of Geotechnical Engineering, ASCE, March 1990.

  • BRIAUD, J.L., COYLE, H.M., TUCKER, H.M., “Axial Response of 3 Vibratory and 3 Impact Driven H-Piles in Sand,” Transportation Research Record, January 1990.

  • BRIAUD, J.L., MOORE, B.H., MITCHELL, G. B., “Analysis of the Pile Load Tests at Lock & Dam No. 26,” ASCE Foundation Engineering Congress, Chicago, June 1989.

  • BRIAUD, J.L., PORWOLL, H., ANEWNEG: Microcomputer Program for Downdrag on Piles,” ASCE Foundation Engineering Congress, Chicago, June 1989.

  • BRIAUD, J.L., DUPIN, R.M., KUBENA, M.E., “Integrity and Capacity of 3 Drilled and Grouted Piles,” Offshore Technology Conference, Houston, May 1989.

  • BRIAUD, J.L., TUCKER, L.M., NG, E., “Axially Loaded 5 Pile Group and Single Pile in Sand,” Proceedings of the International Conference of Soil Mechanics and Foundation Engineering, Rio de Janeiro, August 1989.

  • BRIAUD, J.L., TUCKER, L.M, “Measured and Predicted Axial Response of 98 Piles,” Journal of Geotechnical Engineering, Vol. 114, No. 9, ASCE, Reston, VA, USA, Sept. 1988.

  • COSENTINO, P.J., BRIAUD, J.L., “FWD Backcalculated Moduli Compared to Pavement Pressuremeter Moduli and Cyclic Triaxial Moduli,” Proceedings of the First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli, ASTM STP, Baltimore, June 1988.

  • BRIAUD, J.L., “Evaluation of CPT Pile Capacity Methods Using a 98 Pile Load Test Data Base,” First International Symposium  on Penetration Testing, Orlando, March 1988.

  • BRIAUD, J.L., “The Cone Pressuremeter: Results and Applications,” Proceedings of a session at the First International Symposium on Penetration Testing, Orlando, March 1988.

  • COSENTINO, P.J., BRIAUD, J.L., TERRY, T.A., “Modelling Rate Effects and Cyclic Loads with the Pressuremeter,” Proceedings of the 11th Annual Energy-sources Technology Conference and Exhibition, ASME, New Orleans, January 1988.

  • BRIAUD, J.L., ANDERSON, J.S., PERDOMO, D., TUCKER, L.M., “Evaluation of API Method Using 98 Vertical Pile Load Tests,” Offshore Technology Conference, Houston, May 1987.

  • BRIAUD, J.L., TUCKER, L.M., “Horizontally Loaded Piles Next to a Trench,”Proceedings of an ASCE Session on Foundations for Transmission Towers, Atlantic City, April, 1987.

  • BRIAUD, J.L., TUCKER, L.M., “Pieux Charges Horizontalement pres d’une Tranchee,” Foundations of Overhead Supports, EDF, Paris, France, November 1986.

  • LANDVA, A.O., PHEENEY, P.E., LA ROCHELLE, P., BRIAUD, J.L., “Structures on Peatlands - Geotechnical Investigations,” Peatlands Conference, Ottawa, August 1986.

  • BRIAUD, J.L., TUCKER, L.M., “Analysis of the Behavior of an Axially Loaded 5 Pile Group and a Control Single Pile in Sand at Hunter’s Point,” Pile Prediction Symposium, Federal Highway Administration, June 1986.

  • BRIAUD, J.L., “Pressuremeter and Foundation Design,” ASCE Specialty Conference on Use of In Situ Tests in Geotechnical Engineering, Blacksburg, Virginia, June 1986.

  • BRIAUD, J.L., TERRY, T.A., “Rate Effect for Vertical and Horizontal Pile Response in Clays,” International Conference on Numerical Methods in Offshore Piling, Nantes, France, May 1986.

  • BRIAUD, J.L., FELIO, G.Y., “Analysis of Existing Cyclic Vertical Load Tests for Piles in Clay,” Offshore Technology Conference, Paper 5224, Houston, 1986.

  • FELIO, G.Y., BRIAUD, J.L., “Cyclic t-z Curves for Clay Based on Simple Shear Tests,” International Conference on Numerical Methods in Offshore Piling, Nantes, France May 1986.

  • BRIAUD, J.L., TUCKER, L.M., “Pressuremeter and Shallow Foundations on Sand,” Settlement of Shallow Foundation on Sand, Session at the ASCE Convention, Seattle, April 1986.

  • BRIAUD, J.L., “Pressuremeter and Deep Foundation Design,” The Pressuremeter and Its Marine Applications: 2nd International Symposium, ASTM STP 950, Texas A&M University, 1986.

  • BRIAUD, J.L., TUCKER, L.M., “Pressuremeter Standard and Pressuremeter Parameters,” The Pressuremeter and Its Marine Applications: 2nd International Symposium, ASTM STP 950, Texas A&M University, 1986.

  • FELIO, G.Y., BRIAUD, J.L., “Conventional Parameters from Pressuremeter Tests Data: Review of Existing Methods,” The Pressuremeter and Its Marine Applications: 2nd International Symposium, ASTM STP 950, Texas A&M University, 1986.

  • TAND, K.E., FUNEGARD, E.G., BRIAUD, J.L., “Bearing Capacity of Footings on Clay:  CPT Method,” ASCE Specialty Conference, Use of In Situ Tests in Geotechnical Engineering, Vicksburg, 1986.

  • BRIAUD, J.L., FELIO, G.Y., “Cyclic Axial Loads in Piles: Analysis of Existing Data,” Canadian Geotechnical Journal, Vol. 23, No. 3, 1986.

  • BRIAUD, J.L., TUCKER, L.M., SMITH, T.D., “A Pressuremeter Method for Laterally Loaded Piles,” International Conference on Soil Mechanics and Foundation Engineering, San Francisco, August 1985.

  • FELIO, G.Y., BRIAUD, J.L., “Procedure for a Rod Shear Test,” ASTM Geotechnical Testing Journal, Vol. 9, No. 3, 1986.

  • BRIAUD, J.L., DiMILLIO, A.F., “Residual Driving Stresses and Vertically Loaded Piles in Cohesionless Soils,” Public Roads, Vol. 49, No. 1, June 1985.

  • BRIAUD, J.L., RABA, C.F., JOHNSON, W.T., “Predicted and Measured Performance of a Foundation,” Proceedings of Drilled Piers and Caissons at ASCE Convention, Denver, May 1985.

  • BRIAUD, J.L., FELIO, G.Y., “Cyclic Rod Shear Tests in Clay,” Texas Section, ASCE, Geotechnical Engineering Session, Austin, March 1985.

  • BRIAUD, J.L., GARLAND, E.E., “Loading Rate Method for Pile Response in Clay,” Geotechnical Engineering Journal, ASCE, March 1985.

  • BRIAUD, J.L., TUCKER, L.M., “Piles in Sand: A Method Including Residual Stresses,” Geotechnical Engineering Journal, ASCE, November 1984

  • BRIAUD, J.L., TUCKER, L.M., “Residual Stresses in Piles and the Wave Equation,” ASCE Symposium on Deep Foundations, San Francisco, October 1984.

  • FELIO, G.Y., LYTTON, R.L., BRIAUD, J.L., “Statistical Approach to Bishop’s Method of Slices,” IV International Symposium on Landslides, Toronto, September 1984.

  • BRIAUD, J.L., GARLAND, E.E., FELIO, G.Y., “Loading Rate Parameters for Piles in Clay,” Offshore Technology Conference, May 1984.

  • BRIAUD, J.L., PACAL, A.J., SHIVELEY, A.W., “Power Line Foundations Design Using the Pressuremeter,” International Conference on Case Histories in Geotechnical Engineering, St. Louis, May 1984.

  • BRIAUD, J.L., RINER, K.B., OHYA, S., “Cyclic Pressuremeter Tests for Cyclic Lateral Loads,” Offshore Technology Conference, Houston, May 1984.

  • BRIAUD, J.L., TUCKER, L.M., “Coefficient of Variation for In Situ Tests in Sand,” ASCE Symposium on Probabilistic Characterization of Soil Properties, Atlanta, April 1984.

  • BRIAUD, J.L., GAMBIN, M., “Suggested Practice for the Preparation of a Pressuremeter Test Borehole,” Geotechnical Testing Journal, American Society for Testing and Materials, November 1983.

  • BRIAUD, J.L., SMITH, T.D., MEYER, B.J., “Pressuremeter and Laterally Loaded Piles: Comparison of Existing Methods,” ASTM Symposium on the Design and Performance of Laterally Loaded Piles and Pile Groups, Kansas City, June 1983.

  • JOHNSON, L.D., BRIAUD, J.L., STROMAN, W.R., “Lateral Load Test on an Aged Drilled Shaft,” ASTM Symposium on the Design and Performance of Laterally Loaded Piles and Pile Groups, June 1983.

  • BRIAUD, J.L., LYTTON, R.L., HUNG, J.T., “Obtaining Moduli from Cyclic Pessuremeter Tests,” Proceedings of the American Society of Civil Engineers, Journal of the Geotechnical Division, May 1983.

  • BRIAUD, J.L., SMITH, T.D., MEYER, B.J., “Pressuremeter Gives Elementary Model for Laterally Loaded Piles,” International Symposium on Soil and Rock Investigations by In Situ Testing, Paris, May 1983.

  • BRIAUD, J.L., SMITH, T.D., MEYER, B.J., “Pressuremeter P-y Curve Design Method for Laterally Loaded Piles,” Proceedings of the Geotechnical Engineering Session held in Corpus Christi, Texas, on March 18-19, 1983, ASCE, Texas Section, San Antonio, May 1983.

  • BRIAUD, J.L., SMITH, T.D., MEYER, B.J., “Using the Pressuremeter Curve to Design Laterally Loaded Piles,” Offshore Technology Conference, Houston, May 1983.

  • SHIELDS, D.H., BRIAUD, J.L., “A New Pressuremeter and Test for Pavements,” International Symposium on Soil and Rock Investigations by In Situ Testing, Paris, May 1983.

  • BRIAUD, J.L., MEYER, B.J., “In Situ Tests and their Applications in Offshore Design,” ASCE Specialty Conference on Geotechnical Practice in Offshore Engineering, Austin, April 1983.

  • BRIAUD, J.L., LYTTON, R.L., HUNG, J.T., “Using a Pressuremeter for Pavement Design and Evaluation,” International Symposium on Bearing Capacity of Roads and Airfields, Norwegian Institute of Technology, June 1982.

  • BRIAUD, J.L., SMITH, T.D., MEYER, B.J., “Design of Laterally Loaded Piles using the Pressuremeter Test Result,” Symposium on the Pressuremeter and Its Marine Applications, Paris, April 1982.

  • BRIAUD, J.L., SHIELDS, D.H., “Use of a Pressuremeter Test to Predict the Modulus and Strength of Pavement Layers,” Transportation Research Record, No. 810, November 1981.

  • BRIAUD, J.L., SHIELDS, D.H., “Pressuremeter Tests at Very Shallow Depth,” Proceedings of the American Society of Civil Engineers, Journal of the Geotechnical Engineering Division, Vol. 107, GT8, August 1981.

  • BRIAUD, J.L., “The Pressuremeter: A Promising Apparatus for Pavement Design,” Texas Transportation Researcher, Texas Transportation Institute, July 1980.

  • BRIAUD, J.L., SHIELDS, D.H., “A Special Pressuremeter and Pressuremeter Test for Pavement Evaluation and Design,” Geotechnical Testing Journal, American Society for Testing and Materials, Vol. 2, No. 3, September 1979, pp. 143-151.